data brief for further information contact your local stmicroelectronics sales office. april 2011 doc id 18244 rev 3 1/3 3 STM-STUDIO stm studio for stm32 and stm8 devices features runs on pcs with microsoft ? windows xp, vista and windows 7 os connects to any stm8 via st-link, rlink or stice (swim protocol) connects to any stm32 via st-link (jtag or swd protocols) reads on-the-fly (non intrusive) variables from ram while application is running parses dwarf debugging information in the elf application executable file 2 types of viewer: ? variable viewer - real-time waveforms, oscilloscope-like graphs ? touchpoint viewer - association of 2 variables, one on the x axis, one on the y axis possibility to log da ta into a file, and replay later (exhaustive record display, not real-time) description stmicroelectronics stm studio helps debug and diagnose stm8 and stm32 applications while they are running by reading and displaying their variables in real-time. running on a pc, stm studio interfaces with stm8 and stm32 mcus via standard development tools, such as the low cost st-link and rlink along with the high-end stm8 stice emulation system. stm studio is a non-intrusive tool, preserving the real-time behavior of applications. stm studio perfectly co mplements traditional debugging tools to fine tu ne applications. it is well suited for debugging applications which cannot be stopped, such as motor control applications. different graphic views are available to match the needs of debugging and diagnosis or to demonstrate application behavior. table 1. order code order code reference stmstudio stm studio software www.st.com
STM-STUDIO 2/3 doc id 18244 rev 3 revision history table 2. document revision history date revision changes 30-nov-2010 1 initial release. 14-mar-2011 2 revision skipped due to publication issue. 07-apr-2011 3 document republished as data brief instead of release note.
STM-STUDIO doc id 18244 rev 3 3/3 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a parti cular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by an authorized st representative, st products are not recommended, authorized or warranted for use in milita ry, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or registered trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2011 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com
|
